Ercole Ecoactive - Pollution Reduction

Ercole Ecoactive - Pollution Reduction

£249.00

Ercole® Ecoactive is a photocatalytic cementitious overlay that can be applied at the low thickness and activates a chemical reaction that causes the decomposition of pollutants, making them harmless. Ercole® Ecoactive ensures over 60% of pollution reduction, and Italcementi certifies it.

Available on backorder

Ecobeton

Description

Ercole® Ecoactive is a photocatalytic cementitious overlay that can be applied at the low thickness and activates a chemical reaction that causes the decomposition of pollutants, making them harmless. Ercole® Ecoactive ensures over 60% of pollution reduction, and Italcementi certifies it. Ercole® Ecoactive is ready for use; you need just to add water. It is designed for low thickness coating on concrete, plaster, wood, asphalt, and other surfaces. Ercole® Ecoactive contains the Tx principle of Italcementi, which accelerates the decomposition of pollutants, and a selection of special additives, ensuring an excellent adhesion on the surface on which it is applied.

Ercole and pollution reduction

• Ready to use, mix with water
• For indoor and outdoor applications
• High versatility
• Easy application
• Application from 1 to 3 mm thickness
• Excellent adhesion on the surface
• Wear resistance
• Weatherproof
• High freeze-thaw cycles resistance
• De-icing salt resistance
• Waterproof
• No toxic, eco-friendly and safe
• up to 60% pollution reduction
, fine particulate matter and smog emissions
• It reduces the pollution of over 60%
• it is a photocatalysis activator
• It makes clean and healthy air

Ercole ecoative - pollution reduction

Application

Ercole® Ecoactive can be applied with a squeegee, spray machine, float, trowel or similar systems.
The low thickness cementitious overlays need mild temperature and, if possible, uniform sunlight in order to complete the curing. The product must be applied only where surface temperature is above 5 °C and air temperature above 10 °C. Do not apply if the temperature is above 40 °C. Do not apply if precipitations are foreseen in the following 24 hours.

Product mixing:

Ercole® Ecoactive is ready to use, just by adding water (3-4 litres for a dry mixture, 4-6 litres of the self-levelling mixture) and mixing with a mixing drill in the bucket until you get the desired consistency, trying to avoid air bubbles during mixing. The self-levelling mixture is the most common application for 1 to 3 mm thickness overlays.

Application of pollution-reducing overlay:

The surface must be dampened before the application. For low thickness coatings use the self-levelling mixture with a squeegee. It can be sandpapered both between coats and after the final application (on a dry surface), using a single-brush machine with sandpaper or a polishing machine. The final surface should appear uniform in texture and appearance.

 

Additional information

Weight 27 kg
Dimensions 30 × 30 × 50 cm

Brand

Ecobeton

Italian manufacturer of concrete additives, concrete repair systems and concrete protection. Also microcements and cementitious overlays
Ecobeton

You may also like…

  • Ercole - microcement base for internal and external use

    Ercole White – Durable Microcement Base

    £178.00
    Add to cart
  • Microbond - polished concrete look microcement

    Microbond – Safe Cement Based Microcement

    £185.00
    Add to cart

Leave a Reply

Your email address will not be published. Required fields are marked *