Micro med+ is a solution of waxes for exceptional maintenance of cementitious overlays such as Ercole® and Microbond®Micro med+ fills surface porosity with a water repellent film giving a pleasantly natural effect and renew surfaces worn by high foot traffic or by frequent contact with water (i.e. shower stall).
2 in stock (can be backordered)
Microcement and Concrete Wax
Micro med+ concrete wax fills surface porosity with a water repellent film giving a pleasantly natural effect and renew surfaces worn by high foot traffic or by frequent contact with water (i.e. shower stall).
Micro med+ is a hydro repellent dispersion of waxes for the intensive maintenance of cementitious overlays subjected to high foot traffic and for the exceptional maintenance of worn surfaces.
• Forms a hydro repellent film
• Preserves aspect of the overlay
• Gives a natural effect to the surface
Application of Concrete wax
Before applying Micro med+ concrete wax be sure that the surface is clean and totally dry, free from dirt, greases, sealers, soaps.
Micro med+ is ready for use. Shake well before use and then spray the product on the surface directly and spread out with a soft fabric or wax spreader avoiding puddles on the surface. after 30 minutes, when the treated area becomes matte is possible to polish the surface with a soft fabric or a floor sanding machine with a specific felt pad.
Micro med+ is not water dilutable.
Micro med+ may be applied periodically on high foot traffic areas or with frequent contact with water.
An excess of Micro med+ can increase the slipperiness of the surface, especially smooth or low absorbent surface.
Micro med+ doesn't substitute a protective finish such as Cerbero, Gi.Gi. Sealer or Steinfix Plus. At low temperature, Micro med+ may thicken. Set the product at temperatures above +15°C before the use. Read the Material Safety
|Dimensions||10 × 10 × 25 cm|